FAQS

YOU CAN SAVE TIME AND QUICKLY CHECK IF YOUR QUESTIONS HAVE ALREADY BEEN ASKED AND ANSWERED HERE. IF YOU HAVE OTHER QUESTIONS, PLEASE CONTACT US, AND WE WILL BE HAPPY TO ANSWER THEM.

NOVATEST A1000

You can use A1000 for continuous VOC monitoring such as in industrial emission detection, leak detection, fenceline monitoring, or ambient air monitoring. Generally speaking, you can use it in any application as long as there are VOCs (volatile organic compounds) or inorganic gases with ionization potential within 10.6 eV. Due to its standard chassis design, the A1000 is compatible with most existing air monitoring stations.
You can customize both the structure of  the A1000 and the built-in methods, but you will need to let us know your application or target compounds. We install particular columns and/or the detector at your request or based on the information you provide. We can also generate a built-in method with programming parameters of your target compounds all preset.
For the default built-in method, the Air Quality has 21 target compounds. But with a customized built-in method, you can have as many compounds as you want.
Yes. Generally speaking, you can use it in any application as long as the organic compounds and inorganic gases can be separated and have ionization potential within 10.6 eV.
The A1000 automatically samples the surrounding air by pumping air into the system through a sampling port.
For best results, the minimum sampling time is 6 seconds, or 0.1 minute. Here are some recommendations for sampling time based on estimated sample concentration:  5 minutes or more for 1 ppb or less, 2 ~ 5 minutes for 1 ppb ~ 500 ppb, 2 minutes or less for 1 ppm or above.
No. The A1000 will run auto cleaning after each test which saves you the maintenance work. But you can still run “Deep Clean” if you want to further clean the system.
Normally you won’t need a filter. But if there are large particles like dust or PM2.5 in the surrounding area, a filter is highly recommended.
Connect the gas cylinder to the A1000 using a standard Swagelok connector.

ASK A QUESTION

Didn’t find what you want? Leave us a message and we will reply back to you very soon! Ads are strictly prohibited.